How To Reset ASUS Router - Step By Step Guide

How To Reset ASUS Router – Step By Step Guide

We need to reset the WiFi router or mesh system in many cases, especially if it’s working as normal. Many other scenarios are also there that make us reset the module. Suppose you have forgotten your default username and password or given your router to some other users. In all these scenarios, you may have to reset the internet router. Therefore, knowing how to reset ASUS router can help you in all these cases. Here are several possible solutions to do this job. 

We have discussed many in-detailed methods below to safely reset the ASUS routers. In addition, this post discusses the pros and cons of each method, all necessary steps, safety cautions, devices on which that particular method is applicable, and more. All you have to do is to check your device from the list, and if it’s present, you must try that method. Remember, each method can vary between different devices. If one doesn’t work, you must try the next one. Let’s read!

How To Reset ASUS Router?

How to reset asus router

Here are all the methods to reset your ASUS router.

Method 1: Reset the ASUS Router Via Reset Button

Resetting the ASUS router via the reset button is the easiest way in this article. It’s primarily used when you don’t know the login details like user name and password and want to reset without entering these credentials. Remember, this method applies to all routers with reset buttons. If yours has reset, you can try this. The steps for this method are included as follows: 

Step 1: Locate the Reset button, which is given on the back of the router or mesh WiFi system. 

Note: It’s mainly under the WPS button, with “Reset” written on the top or beside it.

Step 2: Grab a ballpoint or paper clip > use the tip to press the Reset button. Keep pressing it for at least 10 seconds until the power LEDs start fleshing. 

Your router would have reset up to this point. Try logging in by entering your default username and password, or set these credentials from scratch. 

Method 2: Reset ASUS Router Via WPS Button

If the router’s reset button is not working, resetting the ASUS router using the WPS button comes into play. This method applies to ASUS’s following devices.

[Devices names are taken from ASUS]

Products: 4G-AC53U, 4G-AC55U, 4G-AC68U, 4G-AC86U, 4G-AX56, Blue Cave, BRT-AC828, DSL-AC68R, DSL-AC68U, RP-AC1900, RP-AC51, RP-AC53, RP-AC55, RP-AC68U, RT-AC1200, RT-AC1200_V2, RT-AC1200E, RT-AC1200G, RT-AC1200G+, RT-AC1200GU, RT-AC1200HP, RT-AC1300G PLUS, RT-AC1300UHP, RT-AC1750, RT-AC1750_B1, RT-AC1750-B1, RT-AC1900, RT-AC1900P, RT-AC1900U, RT-AC3100, RT-AC3200, RT-AC51U, RT-AC51U+, RT-AC52U, RT-AC52U B1, RT-AC53, RT-AC54U, RT-AC55UHP, RT-AC56S, RT-AC58U, RT-AC59U, RT-AC59U_V2, RT-AC66R, RT-AC66U, RT-AC66U White, RT-AC66U-B1, RT-AC66W, RT-AC67U, RT-AC68P, RT-AC68R, RT-AC68RW, RT-AC68U, RT-AC68U White, RT-AC68UF, RT-AC68W, RT-AC750, RT-AC750GF, RT-AC750L, RT-AC85P, RT-AC87R, RT-AC87U, RT-AC87W, RT-AC88U, RT-ACRH13, RT-ACRH17, RT-AX53U, RT-AX89X, RT-N11P-B1, RT-N12 (VER.D1), RT-N12+ B1, RT-N12E-C1, RT-N12HP B1, RT-N12-plus-PRO, RT-N12-VP-B1, RT-N14UHP, RT-N18U, RT-N19, RT-N300-B1, RT-N66R, RT-N66U (VER.B1), RT-N66U C1, RT-N66W, RT-N800HP

Suppose your device is one of these devices. In such a case, try all the steps given below: 

Step 1: Turn off your router > locate the WPS button given on the router.

Note: It’s mainly on the back alongside the reset button, with WPS mentioned.

Step 2: Grab a ballpoint or paper clip > long press and hold the WPS button > turn on the router. 

Note: Keep holding the WPS button until it turns on and starts flashing. 

Step 3Release the WPS button once the LED light starts flashing

The router will automatically reboot once the power light stops flashing. Wait until the router turns back on.  

Method 3: Reset ASUS Router Via Web GUI

The following method of resetting the ASUS router uses the Web GUI. In this method, we first have to set up the whole thing and then proceed toward resetting the settings. 

Step 1: Set up the wireless router using the wired connection. To do so, connect the wireless router’s AC adaptors to the DC-IN slot and plug the adaptors’ other end into the power outlet. After that, use the bundled network cable and connect a PC to the router’s LAN outlet. 

Step 2: Click on this link, https://router.asus.com/, to launch a web browser. This will take you to a login portal. Enter your username and password > Click sign in.

Note: If you have forgotten your username and password, you have to restore these to factory default. Use method 1 or method 2 to reset these credentials. 

Step 3: Restore factory defaults. For this, go to Administration > Restore/Save/Upload Setting > click the Restore button to restore to factory defaults. 

Note: A new window will pop out asking, are you sure you want to continue restoring? Select OK. Wait until the router’s restoring process is completed. Don’t shut down or power down the router since it may affect the process, and you may have to repeat this method.

Note: Once the restoration process is completed, it will transform all the settings into factory defaults like internet settings and SSID and clear all the passwords, data, and web history.

Step 4: Configure new settings. Once everything is restored, you must configure new settings for your ASUS wireless router. Use Web GUI to set up the new settings.

Method 4: Reset the ASUS Router Via App

In this method, we’ll use the ASUS Router app to reset the ASUS router easily. Suppose you haven’t downloaded the app yet. In such a case, click on ASUS Router APP, and download it on your android or iPhone device. Once the app is downloaded, let’s jump straight into the method!

Step 1: Connect your phone to the router you want to reset using WiFi. Once done, open the app and log into it.  

Step 2: Once entered the app, go to Settings > System Settings

Step 3: Locate Factory Default and click on it. A new Restore factory default warning will pop up. Click OK to continue the process. 

Note: The restoration process may take up to 3 minutes, so wait until its completion. Once completed, you will no longer be connected to the ASUS routers. 

Step 4: Reconfigure your connection to the router and set it according to your requirements.

How To Factory Reset ASUS Router?

Many users often face several issues with their WiFi routers for several reasons, and as a result, the internet connection may affect them. If you’re facing such an issue related to internet speed or connection, resetting the router may be the ultimate solution. Moreover, if you have forgotten your ASUS router’s credentials, like username and password, restoring the router to its initial default setting can help. In all these cases, this post on how to factory reset ASUS router can play a crucial role in resolving the issue. 

This article can help you know multiple methods of factory resetting the ASUS or some third-party routers, restoring the default settings, and even setting up new credentials. On top of that, we have added the pros and cons of each tactic, precautionary steps, key points, devices on which each method is applicable, and more. Moreover, we have tried to break down each method into some straightforward steps to make things easier. Read this blog post until the end if you want to safely restore the router’s defaults. 

Resetting the ASUS routers to their factory defaults is quite a straightforward process. All you have to do is check your device, decide which method can be applied to it, and apply by following a few steps in this article. Let’s explore the in-detail yet simple techniques. 

1. Using The Reset Button

In this method, we’ll learn about resetting ASUS’s router using the reset button given on possibly all the routers. This is one of the easiest methods on the list, which is applicable on possibly all the devices since all have the required button; reset button. This method is especially suitable if the login credentials like username and password are not in your mind. Let’s check the method to factory reset the ASUS router!

  • Step 1: First, find the reset button from the routers. Remember, this is mainly given on the back of the routers beside the WPS button and mentioned with Reset. So start finding it from the rear side. 
  • Step 2: Next, press the Reset button for at least 10 seconds until the power LED starts flashing. For this, grab a ball pen or paper clip to easily access the button and press it. 
  • Step 3: Once the router is reset, enter your default username and password to login into the router. You can also reset these credentials from scratch as you want. 

2. Using The WPS Button

Sometimes, factory resetting the ASUS routers using the Reset button doesn’t work out for a few routers or users. If you’re one of such users, you can try restoring a router using the WPS button. First, check these devices to find whether this method is applied to your router or not. 

[Devices names are taken from ASUS]

Products: 4G-AC53U, 4G-AC55U, 4G-AC68U, 4G-AC86U, 4G-AX56, Blue Cave, BRT-AC828, DSL-AC68R, DSL-AC68U, RP-AC1900, RP-AC51, RP-AC53, RP-AC55, RP-AC68U, RT-AC1200, RT-AC1200_V2, RT-AC1200E, RT-AC1200G, RT-AC1200G+, RT-AC1200GU, RT-AC1200HP, RT-AC1300G PLUS, RT-AC1300UHP, RT-AC1750, RT-AC1750_B1, RT-AC1750-B1, RT-AC1900, RT-AC1900P, RT-AC1900U, RT-AC3100, RT-AC3200, RT-AC51U, RT-AC51U+, RT-AC52U, RT-AC52U B1, RT-AC53, RT-AC54U, RT-AC55UHP, RT-AC56S, RT-AC58U, RT-AC59U, RT-AC59U_V2, RT-AC66R, RT-AC66U, RT-AC66U White, RT-AC66U-B1, RT-AC66W, RT-AC67U, RT-AC68P, RT-AC68R, RT-AC68RW, RT-AC68U, RT-AC68U White, RT-AC68UF, RT-AC68W, RT-AC750, RT-AC750GF, RT-AC750L, RT-AC85P, RT-AC87R, RT-AC87U, RT-AC87W, RT-AC88U, RT-ACRH13, RT-ACRH17, RT-AX53U, RT-AX89X, RT-N11P-B1, RT-N12 (VER.D1), RT-N12+ B1, RT-N12E-C1, RT-N12HP B1, RT-N12-plus-PRO, RT-N12-VP-B1, RT-N14UHP, RT-N18U, RT-N19, RT-N300-B1, RT-N66R, RT-N66U (VER.B1), RT-N66U C1, RT-N66W, RT-N800HP

Found your device on the list. Now, let’s explore the method!

  • Step 1: Turn your router off and locate the WPS button on the router. This button is mainly on the back side of the router besides the reset button and is carved with the “WPS” term.
  • Step 2: Long press the WPS button, keep pressing it and turn on the router simultaneously. Keep pressing the button until the router turns on and its power button starts flashing. 
  • Step 3: Release the WPS button once the LED starts flashing. 

Note: Router will automatically be turned on once the light starts flashing. You must wait until it happens to complete the process.  

  • Step 4Reset the credentials from scratch once the router is turned on. 

3. Using Web GUI

We’ll learn to reset the ASUS routers using the Web GUI facility in this method. This way of achieving the required results comprises two parts. First, we’ll connect the wireless router to the computer using a wire. Once the connection is established, we’ll reset our router’s credentials and settings. The method is included as follows:  

  • Step 1: Establish the required connection of the router. For this, connect the wireless ASUS router’s AC adaptor’s one end to the DC-IN slot on the router while another side to the wall power socket. Plus, connect the bundled network cable’s one end to the PC and its other end to the router’s LAN outlet. 
  • Step 2: Open this link [https://router.asus.com/], which will take you to ASUS’s website. Enter login credentials, username, and password, and sign in

Note: If you don’t know your login credentials, try 1st and 2nd method on the list to reset the account details.  

  • Step 3: Restore the factory setup. For this, locate Administration and open it. Afterward, go to Restore/Save/Upload Setting and click the Restore button to recover the first-hand defaults. Confirm the restorations process by clicking OK if a new confirmation window pops up. 

Note: This will reset everything to defaults, including internet settings, passwords, data, or browsing history. 

  • Step 4: Once everything is done, configure a new password, settings, or everything you want from the Web GUI portal.

4. Using ASUS Router’s App

In this method, we’ll use the ASUS Router app to restore the default settings. So, if you haven’t downloaded the app, use this link [https://www.asus.com/content/asus-router-app/] and install it. Once done, follow the method as follow:

  • Step 1: Connect your phone to the ASUS router you want to rest. Open the app and login into it.  
  • Step 2: Open the app. Go to Settings > System settings
  • Step 3: Figure out the Factory Defaults and click it. You must click OK if a new confirmation window arrives. Remember, this process may take up to 3 minutes to be completed, so wait until the completion. 
  • Step 4: Reconnect your mobile to the router, open the app, and set your password, username, and rest of the settings as you wish.

Conclusion

The above step-by-step guide on resetting the ASUS router will solve your issue, Follow the instructions as it is given, In case you face any issues, You can always reach out to us or ask about your issue by commenting below. Keep reading our latest 100% working guides. Thank You.

Leave a Comment

Your email address will not be published. Required fields are marked *